This forum is monitored by iZ3D Support Staff and Stereoscopic Veterans.
However, please keep in mind that for iZ3D to find a solution, we need as much information about the issue as possible.
You may also fill out an iZ3D Support Ticket here.
Posted: May 28, 2008, 01:48:55 PM Post subject: How to get Activation Code for dual projection ?
I useing two projectors but I can't get them works on dual projection with iz3d drivers, why ? How to get Activation Code for dual projection ? How to register on Activation Page ? THX _________________ Shaman
Posted: May 28, 2008, 02:41:15 PM Post subject: Re: How to get Activation Code for dual projection ?
Shaman wrote:
I useing two projectors but I can't get them works on dual projection with iz3d drivers, why ? How to get Activation Code for dual projection ? How to register on Activation Page ? THX
Hello Shaman, for dual projector output, make sure that when you installed the driver you had HMD checked. This is the mode to use for dual projectors.
Also, in the Drivers on the 'Input' tab, please make sure you change it to HMD mode as well.
As far as a license, you should have a 30-day trial when you downloaded. We have not yet opened registration for activation yet. _________________ -Charlie Rosenberg
Technical Support Specialist / Web Master
iZ3D Inc.
Thank you Welder for answer but still doesn't works. The Iz3d Drivers doesn't see second display (projector) . Have a look for Diagnostic >
--------------------
System Information
---------------------
iZ3D Driver Version: 1.07.0034
OS Extended Long String (Localized): Microsoft Windows XP Professional (5.1, kompilacja 2600) Dodatek Service Pack 2 (2600.xpsp_sp2_gdr.070227-2254)
OS Version: 5.1.2600.2
System type: 32-bit
DirectX Version Long String (English): DirectX 9.0c (4.09.0000.0904)
DirectX Version: 9.0c
Physical Memory: 2046(Mb)
Used PageFile: 306(Mb)
Available PageFile: 3122(Mb)
Direct3D8 Debug Runtime Available: 0
Direct3D Debug Runtime Running: 0
Direct3D Debug Level: 0
Windows Directory: C:\WINDOWS
BuildLab: 2600.xpsp_sp2_gdr.070227-2254
DxDiag Version: 5.03.2600.2180
Processor String (English): Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz (2 CPUs)
System Manufacturer String (English): Packard Bell BV
System Model String (English): 00000000000000000000000
BIOS String (English): Phoenix - AwardBIOS v6.00PG
Physical Memory String (English): 2046MB RAM
DirectX Version String (English): 4.09.0000.0904
PageFile String (Localized):
MachineName (English): SHAMAN
Languages String (English): Polish (Regional Setting: Polish)
PageFile String (English): 306MB used, 3122MB available
Time String (English): 5/30/2008, 00:31:39
--------------------
Display Information
---------------------
Device name: \\.\DISPLAY1
Description: NVIDIA GeForce 7900 GTX
Key device ID: Enum\PCI\VEN_10DE&DEV_0290&SUBSYS_22101682&REV_A1
Key device key: \Registry\Machine\System\CurrentControlSet\Control\Video\{2D4553E7-BC49-4457-B57E-F1D9728BF550}\0000
Manufacturer: NVIDIA(Mb)
Chip type: GeForce 7900 GTX(Mb)
DACType: Integrated RAMDAC(Mb)
Revision:
DisplayMemory (English): 512.0 MB
DisplayMode (English): 800 x 600 (32 bit) (60Hz)
Screen width: 800
Screen height: 600
Bits per pixel: 32
Refresh rate: 60
Monitor name:
Monitor maximum resolution:
Driver name: nv4_disp.dll
Driver version: 6.14.0010.9371
Driver attributes:
DriverLanguage (English): English
DriverDate (English): 5/21/2007 08:31:30
Adapter: 0
VendorId: 0x10DE
DeviceId: 0x0290
DS texture format D16: supported
DS texture format D16 LOCKABLE: unsupported
DS texture format D24S8: supported
DS texture format D24X8: supported
DS texture format ATI DF16: unsupported
DS texture format ATI DF24: unsupported
DS texture format NVidia INTZ: unsupported
DS texture format NVidia RAWZ: unsupported
Where is Device name: \\.\DISPLAY2
I checked all versions of drivers, only 1.07.0032 and 0034 are for dual projection but doesn't works. What do you think about this ? Thx _________________ Shaman
